■ Jam protection function
Sensors are installed in the right and left sides of the
power back door.
When the door is automatically closing and the sen-
sors are pushed due to an object being clamped, the
jam protection function operates. From that position
the door automatically moves a little in the opposite
direction and then the function stops.
Related Links
Customizable features(P. 791)
Operating the back door using the smart entry & start system
The back door can be locked/unlocked while carrying an electronic key or the
card key.The driver should always carry the electronic key or the card key.
Locking/unlocking the back door using smart entry & start system
Perform the following while carrying an electronic key.
1 Press 1.
All of the doors will unlock. However, the doors
cannot be unlocked within 3 seconds after they
were locked.
2 Press 2.
All of the doors will lock. Make sure that the
doors are securely locked.
Locking/unlocking the back door using the door lock switches
Locking/unlocking the back door using the door lock switches
1
Press the
switch.
All of the doors, including the back door, will
lock.
2
Press the
switch.
All of the doors, including the back door, will
unlock.
1-5. Entering/exiting the vehicle and loading luggage
153
1
Before driving
To Next Page
