INFORMATION
When all of the doors are locked, if a kick operation is detected by the kick sensor, all
of the doors will unlock.
Adjusting the open position of the back door
The open position of the power back door can be adjusted.
1 Stop the back door in the desirable position.
2 Press and hold the
switch on the lower part of the back door for
approximately 2 seconds.
When the settings are completed, the buzzer sounds 4 times.
When opening the back door the next time, the back door will stop at that position.
Canceling the adjusted open position of the back door
●
Press and hold the switch on the lower part of the back door for
approximately 7 seconds.
After the buzzer sounds 4 times, it sounds twice more.
When the power back door does the opening operation the next time, the door will
open to the initial settings position.
Rear seat seatbacks
Folding the seat backs can be done with ther lever operations.
WARNING
■ When operating the rear seatback
Observe the following precautions.
● Do not operate the rear seat if it is occupied.
● After adjusting the seat, make sure that the seat is locked in position. If the seatback is
not securely locked, the red marking will be visible. Make sure that the red marking is
not visible.
1-5. Entering/exiting the vehicle and loading luggage
160
To Next Page
Loading...
