Related Links
Manual applying/releasing of the parking brake (manual mode)(P. 226)
Changing the power switch mode
Modes can be changed by pressing the power switch with brake pedal released.
(The mode changes each time the switch is pressed.)
1 OFF
The emergency flashers can be used.
2 ACC
*1
Some electrical components such as the
audio system can be used. "ACCESSORY"
will be displayed on the multi-information
display.
3 ON
All electrical components can be used.
"IGNITION ON" will be displayed on the
multi-information display.
INFORMATION
■ Auto power off function
● If the vehicle is left in ACC or ON (the hybrid system is not operating) for more than
20 minutes with the shift position in P, the power switch will automatically turn to OFF.
● If the 12-volt battery is low with the shift position is in P and the power switch is in ACC
or ON (the hybrid system is not operating). The power switch is automatically turn to
OFF.
However, this function cannot entirely prevent the 12-volt battery discharge. Do not leave
the vehicle with the power switch in ACC or ON for long periods of time when the
hybrid system is not operating.
■ When the shift control system malfunctions
If the shift control system is malfunctioning, when attempting to turn the power switch off,
it may not be able to be turned off. In this situation, it may be possible to turn the power
switch off by applying the parking brake and then operating the power switch.
If there is a malfunction in the system, have the vehicle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer. immediately.
*1 :
This can be enabled/disabled through a customize setting.
2-1. Starting and stopping the hybrid system
200
To Next Page
Loading...
