● Guardrails, walls, signs, parked vehicles and similar stationary objects
*1
● Small motorcycles, bicycles, pedestrians, etc.
*1
● Vehicles moving away from your vehicle
● Vehicles approaching from the parking spaces next to your vehicle
*1
● The distance between the sensor and approaching vehicle gets too close
■ Situations in which the system may not operate properly
The RCTA function may not detect vehicles correctly in the following situations:
● When the sensor is misaligned due to a strong impact to the sensor or its surrounding
area
● When mud, snow, ice, a sticker, etc.,is covering the sensor or surrounding area on the
position above the rear bumper
● When driving on a road surface that is wet with standing water during bad weather,
such as heavy rain, snow, or fog
● When multiple vehicles are approaching with only a small gap between each vehicle
● When a vehicle is approaching at high speed
● When equipment that may obstruct a sensor is installed, such as a towing eyelet,
bumper protector (an additional trim strip, etc.), bicycle carrier, or snow plow
● When backing up on a slope with a sharp change
in grade
*1 :
Depending on the conditions, detection of a vehicle and/or object may occur.
6-2. Using the safe driving support functions
452
To Next Page
Loading...
