Turning the RCD function ON/OFF
The RCD function can be enabled/disabled on the center display as follows:
1 Select .
2 Select [Driving assist].
3 Select [Rear camera detection].
When the RCD function is disabled, the driving assist infomation indicator illumi-
nates on the multi-information display.
Changing the RCD buzzer volume
The buzzer volume can be adjusted on the center display.
1
Select .
2 Select [Driving assist].
3 Select [Collision mitigation].
4 Select [Parking assist volume].
Temporarily muting the RCD buzzer
A mute button will be displayed on the center display when an object is detected.
To mute the buzzer, select .To mute the buzzer, select . The buzzers for the
Lexus parking assist-sensor, RCTA and RCD function will be muted simultaneously.
INFORMATION
Mute will be canceled automatically in the following situations:
● When the shift position is changed.
● When the vehicle speed exceeds a certain speed.
● When there is a malfunction in a sensor or the system is temporarily unavailable.
● When the operating function is disabled manually.
● When the power switch is turned off.
6-2. Using the safe driving support functions
462
To Next Page
Loading...
