Advanced Park parallel parking function
■ Function description
The parallel parking function can be used if the target parking space can be
detected when the vehicle is stopped close and aligned with the center of the
parking space. Also, depending on the condition of the parking space, etc., if it is
necessary to change the direction of travel of the vehicle, the shift position can be
changed by assistance control.
Parking using the parallel parking function
1 Stop the vehicle with it aligned near the center of the target parking space.
▶ If there are parking space lines
A
Approximately 1 m (3.3 ft.)
*4
B
Approximately 5 to 6 m (16.4 to 19.7 ft.)
*4
C
Approximately 4.5 m (14.8 ft.) or more
*4
D
Approximately 8 m (26.2 ft.) or more
*4
*4 :
This is a reference measurement for detection of a parking space. Depending on the
surrounding environment, detection may not be possible.
6-2. Using the safe driving support functions
498
To Next Page
Loading...
