INFORMATION
■ If you feel that the vehicle is approaching close to a surrounding vehicle, object,
person, or gutter
→ P.495
■ Parallel exiting function
Do not use parallel exiting function in any situation other than when exiting a parallel
parking spot. If assistance is started unintentionally, depress the brake pedal and stop
the vehicle, then press the Advanced Park main switch to cancel assistance.
■ Situations in which the parallel exiting function will not operate
In situations such as the following, the parallel exiting function will not operate:
● When vehicles waiting at a traffic signal in the exit direction
● When a vehicle is stopped in the area behind where the vehicle will exit
● When a wall, column, or person is detected as near a front or rear side sensor
● When the vehicle has been parked on a curb and a side sensor detects the road
surface
6-2. Using the safe driving support functions
503
6
Driving support system
To Next Page
