2 Accelerate or decelerate to the desired vehi-
cle speed, and press the driving assist switch
to set the maximum vehicle speed.
The speed limiter indicator will change from illu-
minated in white to green.
The set vehicle speed will be displayed on the
multi-information display in green. If the vehicle
speed is set while driving at below approximately
30 km/h (20 mph), the set vehicle speed will be
set to approximately 30 km/h (20 mph).
Press the cancel switch or driving assist switch to
cancel control.
Adjusting the set vehicle speed
● Vehicles without a head-up display: To change
the set vehicle speed, press the [+RES] or [ - ]
switch until the desired speed is displayed.Ve-
hicles with a head-up display: To change the
set vehicle speed, press the [ + ] or [ - ] switch
until the desired speed is displayed.
1 Increase set vehicle speed
2 Decrease set vehicle speed
Short press adjustment (IN DISPUTE): Press
the switch
Press and hold adjustment (IN DISPUTE): Press
and hold the switch until the desired set vehicle
speed is reached.
The set vehicle speed will increase or decrease
as follows:
▶
Vehicles with a head-up dis-
play
▶ Vehicles without a head-up
display
▶ Vehicles with a head-up dis-
play
▶ Vehicles without a head-up
display
▶ Vehicles with a head-up dis-
play
6-2. Using the safe driving support functions
549
6
Driving support system
To Next Page
Loading...
