Short press adjustment (IN DISPUTE): By 1 km/h (0.6 mph) or 1 mph (1.6
km/h) each time the switch is pressed
Press and hold adjustment (IN DISPUTE): Increases or decreases in 5 km/h
(3.1 mph) or 5 mph (8 km/h) increments continuously while the switch is
pressed and held
The set vehicle speed adjustment increment can be changed through a customize
setting.
Canceling/resuming control
1 Press the cancel switch or driving assist
switch to cancel control.
2 Vehicles without a head-up display: Press the [+RES] switch to resume con-
trol.Vehicles with a head-up display: Press the [RES] switch to resume control.
When control is canceled, the speed limiter indicator will change from illuminated in
green to white.
Speed limiter with Road Sign Assist
Vehicles without a head-up display: When RSA function is enabled and the speed
limiter is operating, if a speed limit sign is detected, the detected speed limit will be
displayed with an up/down arrow. The set vehicle speed can be increased/reduced
to the detected speed limit by pressing and holding the [+RES] or [ - ] switch.
Vehicles with a head-up display: When RSA function is enabled and the speed
limiter is operating, if a speed limit sign is detected, the detected speed limit will be
displayed with an up/down arrow. The set vehicle speed can be increased/reduced
to the detected speed limit by pressing and holding the [ + ] or [ - ] switch.
▶
Vehicles without a head-up
display
▶ Vehicles with a head-up dis-
play
6-2. Using the safe driving support functions
550
To Next Page
Loading...
