■ When the set vehicle speed is lower than the detected speed limit
▶ Vehicles without a head-up display
Press and hold the [+RES] switch.
▶ Vehicles with a head-up display
Press and hold the [ + ] switch.
■ When the set vehicle speed is higher than the detected speed limit
Press and hold the [ - ] switch.
INFORMATION
■ The speed limiter with road sign assist may not operate properly when
As the speed limiter with road sign assist may not operate properly in situations where
the RSA may not operate or cannot detect signs correctly, when using this function, make
sure to confirm the actual speed limit.
Vehicles without a head-up display: In the following situations, the set speed may not
change to the detected speed limit by pressing and holding the [+RES] switch or [ - ]
switch:
▶ Vehicles without a head-up
display
▶ Vehicles with a head-up dis-
play
6-2. Using the safe driving support functions
551
6
Driving support system
To Next Page
Loading...
