Lexus NX450h+ 2021 - Page 71

5 With the release key fully inserted into the release slot of the CCID (Charging
Circuit Interrupting Device), turn the plug-cord connector nut of the plug-cord
to remove the cord.
After the plug-cord is removed, remove the release key.
WARNING
Do not leave the vehicle alone with the plug-cord removed. If the plug-cord is
not installed, water or other foreign matter may enter the CCID (Charging Circuit
Interrupting Device), resulting in a malfunction.
6 Align the protrusion of the CCID (Charging Circuit Interrupting Device), with
the groove of the plug-cord, insert the plug-cord into the CCID (Charging
Circuit Interrupting Device), and then turn the plug-cord connector nut of the
plug-cord to install it.
Turn the plug-cord connector nut of the plug-cord in the opposite direction of removal
until a click sound is heard and the plug-cord is secured.
WARNING
Make sure that there are no foreign objects attached to the connection before
installing the plug-cord. Remove any foreign objects if they are attached. Otherwise,
water or other foreign matter may enter the CCID (Charging Circuit Interrupting
Device), resulting in a malfunction.
1-3. Charging with the plug-in hybrid system
69
1
Before driving