7 Install the plug-cord connector cap and release key to the plugcord that has
been removed.
Securely install the release key to the plug-cord connector cap to prevent it from being
lost. Also, make sure that the release key does not fall out of the plug-cord connector
cap accidentally.
Store the plug-cord in a safe, clean and dry place.
Appendix (Mode 2 AC charging cable)
■ Rating
● Voltage (Un): 220 V - 240 V ~
● Frequency: 50 Hz / 60 Hz 1Φ
● Current: 10 A
● Residual operating current (IΔn): 6 mA
● Ambient temperature: -30°C to 55°C
● IP67
■ Warning symbols
●
This device is for use with electric vehicles. (This device does not require
ventilation)
●
1-3. Charging with the plug-in hybrid system
70
To Next Page
Loading...
