5 300544660_002_C1 11/2016 - © Leybold
Electrical connections. The transmitter must be properly electrically connected in order to perform
according to the specifications. Output pins are not protected against wrong electrical connections.
Wrong electrical connections can cause permanent damage to the transmitter or interference to
measuring performance. Refer to Electrical connections in Chapter 4.
0.4 Liability and Warranty
Leybold assumes no liability and the warranty becomes null and void if the end-user or third parties
disregard the information in this document
use the product in a non-conforming manner
make any kind of interventions (modifications, alterations etc.) on the product
use the product with accessories not listed in the product documentation
The end-user assumes the responsibility in conjunction with the process media used. Transmitter failures due to
contamination are not covered by the warranty.
To Next Page
Loading...
Need help?
General
