LG 22LU7000 - Connecting with an Hdmi Cable

GB-11
EXTERNAL EQUIPMENT SETUP
Connecting with an HDMI Cable

Connect the digital set-top box to HDMI/DVI IN 1 or HDMI IN 2 jack on the TV.

Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)

Select HDMI1 or HDMI2 input source using the INPUT button on the remote
control.
NOTE
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t
support HDMI version 1.3, flickering or no screen display can result. Please use
the latest cables that support at least HDMI version 1.3.
Connecting with an HDMI to DVI Cable

Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.

Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI)
jack on the TV.

Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)

Select HDMI 1 input source using the INPUT button on the remote control.
►
(RGB)
1
2
2
1
1
(RGB)
1
2
2
1
1