GB-90
SOUND & LANGUAGE CONTROL
SOUND & LANGUAGE CONTROL
LANGUAGE SELECTION
Select the default language and the hard of hearing.
1
Select OPTION.
1
Select OPTION.
2
Select Menu Language or
Audio Language or Subtitle
Language.
2
Select
Hard of Hearing( ).
3
Select your desired language.
3
Select On or O.
4
Save.
Audio/Subtitle Language (In Digital Mode Only)
When the languages you selected as the primary for Audio Language and Subtitle Language are not supported, you can select
language in secondary category.
If audio data in a selected language is not broadcast, the default language audio will be played. If subtitle data in a selected language
is not broadcast, the default language subtitle will be displayed.
< Audio Language Selection >
The Audio function allows selection of a preferred language.
When two or more audio languages are roadcast, you can select the audio language.
1
Select Audio.
Audio Language OSD Information
Display Status
N.A
Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Subtitle Language OSD Information
Display Status
N.A
Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing”
2
Select an audio language.
3
Select L+R, L+L or R+R.
< Subtitle Language Selection >
Use the Subtitle function when two or more subtitle languages
are broadcast.
When two or more subtitle languages are broadcast,
you can select the subtitle language with the SUBTITLE
button on the remote control.
Press the
button to select a subtitle language.
►
►
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.
►
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to return to the previous scree
To Next Page
Loading...
