GB-13
EXTERNAL EQUIPMENT SETUP
Connecting with a Euro Scart Cable
Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the TV.
Turn on the DVD player, insert a DVD.
Select AV1 input source using the INPUT button on the remote control.
If connected to AV2 Euro scart socket, select AV2 input source.
Refer to the DVD player’s manual for operating instructions.
NOTE
Any Euro scart cable used must be signal shielded.
Copy-protected programmes will not be output on the EURO scart sockets for
legal reasons. Even if it was output, the video signals fed through the EURO
scart sockets will be not recorded by copyright protection systems.
Scart Output
Main Input AV1 (SCART1 Output) AV2 (SCART2 Output)
Digital TV Mute Digital TV
Analogue TV
Mute
(Analogue TV if the TV mode you last
watched is Analogue mode.)
Analogue TV
AV1 (SCART1)
CVBS
AV1 (CVBS)
RGB
AV2 (SCART2) CVBS AV2 (CVBS)
Component Mute
DVD Mute
RGB Mute
AV3(CVBS) AV3 (CVBS)
HDMI1 Mute
HDMI2 Mute
►
►
To Next Page
Loading...
