TIME SETTING
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has
been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The TV must be in standby mode for the On timer to work.
1
Select TIME.
• To cancel On/Off Time function, select Off.
• For On Time function only
2
Select O Time or On Time.
1
Select Mode.
3
Select Repeat.
2
Select TV or DTV.
4
Select O, Once, Daily,
Mon~Fri, Mon~Sat, Sat~Sun
or Sun.
3
Set the programme.
5
Set the hour.
4
Adjust volume level at
switch-on.
6
Set the minutes.
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to return to the previous screen.
To Next Page
Loading...
