GB-36
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
Manual Update
■
1
Select Manual Update.
2
Select the desired channel number.
3
Select Search. Searches for the new software.
The new software information will be shown.
Refer to “When detecting new software using Auto Update or Manual
Update menu”. (up.37)
Regular Auto Update
In standby mode, if the Regular Auto Update menu is “On”, the TV will search the new software automatically at the search time
without switching to the operation mode.
1
Select Regular Auto Update.
2
Select On.
3
Select Hour or Minute and enter the search time.
4
Select Close.
If the new software is detected, the software update message is displayed when you turn on the TV. Select Yes and press the OK
button to start the software update.
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to return to the previous screen.
■
To Next Page
Loading...
