9
ENG
ENGLISH
ASSEMBLING AND PREPARING
Detaching the stand base
2
Open the screw cover on the back of the stand
base and use a screwdriver to remove the two
screws.
Detach the stand base from the stand hinge
as shown in the figure.
y
To protect the screen from scratches, cover
the surface with a soft cloth.
CAUTION
Stand Base
Stand Hinge
y
The components in the illustrations may dif-
fer from the actual product.
y
Do not carry the monitor upside down, as this
may cause it to fall off its stand and result in
damage or injury.
y
To avoid damaging the screen when lifting
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
CAUTION
1
Place the screen face down.
29EA93
To Next Page
Loading...
