LG 32LS33A - Page 67

67
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
Controlsthepoweron/offoftheset.
Transmission
[k][a][][SetID][][Data][Cr]
Data 00:Off
 01:On
Acknowledgement
[a][][SetID][][OK/NG][Data][x]
*Onlywhenthemonitorisfullypoweredon,the
acknowledgementsignalisreturnedproperly.
*Theremaybeadelaybetweenthetransmission
andacknowledgementsignals.
02. Select input (Command: x b)
Selectsaninputsignal.
Transmission
[x][b][][SetID][][Data][Cr]
Data 60:RGB
 90:HDMI(HDMI1)(DTV)
 A0:HDMI(HDMI1)(PC)
Acknowledgement
[b][][SetID][][OK/NG][Data][x]
*Someinputsignalsmaynotbesupportedonsome
models.
03. Aspect ratio (Command: k c)
Adjuststheaspectratio.
Transmission
[k][c][][SetID][][Data][Cr]
Data 01:4:3
 02:16:9
 04:Zoom(HDMI)(DTV)
 06:Autoratio(HDMI)(DTV)
 09:Original(≥720p)(HDMI)(DTV)
 10to1F:Cinemazoom1to16(HDMI)(DTV)
*Availabledatatypesdifferdependingontheinputsignal.
Formoreinformation,seetheaspectratiosectionofthe
owner'smanual.
*Theaspectratiomaydifferdependingonthemodel's
inputconfiguration.
Acknowledgement
[c][][SetID][][OK/NG][Data][x]
04. Energy saving (Command: j q)
Setstheenergysavingfunction.
Transmission
[j][q][][SetID][][Data][Cr]
Data 00:Off
 01:Minimum
 02:Medium
 03:Maximum
 04:Automatic
 05:Screenoff
Acknowledgement
[q][][SetID][][OK/NG][Data][x]
**Thismaynotbesupportedonsomemodels.
05. Picture mode (Command: d x)
Selectsapicturemode.
Transmission
[d][x][][SetID][][Data][Cr]
Data 00:Vivid
 01:Standard
 02:Cinema
 03:Sport
 04:Game
 05:Expert1
 06:Expert2
 08:Eco
Acknowledgement
[x][][SetID][][OK/NG][Data][x]
06. Contrast (Command: k g)
Adjuststhescreencontrast.
Transmission
[k][g][][SetID][][Data][Cr]
Data 00to64:Contrast0to100
Acknowledgement
[g][][SetID][][OK/NG][Data][x]