LG 32LS33A - Page 73

73
ENG
ENGLISH
CONTROLLING THE MULTIPLE PRODUCT
31. Reset (Command: f k)
ResetssettingsforPicture,ScreenandAudioor
restoresfactorysettings.
(ScreenresetcanonlybeperformedinRGBinput
mode.)
Transmission
[f][k][][SetID][][Data][Cr]
Data 00:Picturereset
 01:Screenreset
 02:Initialsettings(factoryreset)
Acknowledgement
[k][][SetID][][OK/NG][Data][x]
32. Current temperature (Command: d n)
Checkstheinsidetemperaturevalue.
Transmission
[d][n][][SetID][][Data][Cr]
DataFF:Checkstatus
Acknowledgement
[n][][SetID][][OK/NG][Data][x]
[n][][SetID][][OK/NG][Data1][Data2][Data3][x]
*Temperatureisdisplayedasahexadecimalvalue.
33. Key (Command: m c)
SendsakeycodefortheIRremotecontrol.
Transmission
[m][c][][SetID][][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][][SetID][][OK/NG][Data][x]
Forkeycodes,seeIRCodes.
* Some key codesmay not besupported on some
models.
34. Time elapsed (Command: d l)
Checkstheelapsedtime.
Transmission
[d][l][][SetID][][Data][Cr]
Data FF:Readstatus
Acknowledgement
[l][][SetID][][OK/NG][Data][x]
*Thedatareceivedisshownasahexadecimal
value.
35. Product serial number (Command: f y)
Checkstheserialnumberoftheproduct.
Transmission
[f][y][][SetID][][Data][Cr]
Data FF:Checkproductserialnumber
Acknowledgement
[y][][SetID][][OK/NG][Data][x]
*DataisinASCIIcode.
36. Software version (Command: f z)
Checksthesoftwareversionoftheproduct.
Transmission
[f][z][][SetID][][Data][Cr]
Data FF:Checksoftwareversion
Acknowledgement
[z][][SetID][][OK/NG][Data][x]