LG BD600 - Troubleshooting; Picture Issues; Sound Issues; Customer Support

Troubleshooting 33
Troubleshooting
5
Picture
Symptom Cause & Solution
There is no picture.
y
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
y
Connect the video connection securely.
y
Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
y
Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
y
The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears.
y
You are playing a disc recorded in a colour system that is dierent
from your TV.
y
Set the resolution which your TV accepts.
Sound
Symptom Cause & Solution
There is no sound or the sound
is distorted.
y
Connect the audio connection securely.
y
The input source setting on the amplier or the connection to the
amplier is incorrect.
y
The unit is in scan, slow motion, or pause mode.
y
The sound volume is low.
y
Check that the connected amplier is compatible with audio format
output from the unit.
y
The unit’s HDMI OUT jack is connected to a DVI device. The DVI jack
does not accept audio signal.
y
Check the device connected to unit’s HDMI OUT jack is compatible
with audio format output from the unit.
Customer Support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made),
please visit http://www.lg.com/global/support or contact LG Electronics customer care centre.
Open source software notice
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit
http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are
available to download with the source code.