Installation and Configuration
14
Turning on the Projector
1. Connect the power cord correctly to turn the projector on.
2. Press the POWER button. The power indicator blinks green.
ꔈ Power on time is long due to the characteristics of the 3D projector.
ꔈ Press the INPUT button to select an input signal.
ꔈ There will be a brief sound when the projector is turned on.
ꔈ Check if the lens cap is open before turning on the projector.
Turning off the Projector
1. Press the POWER button.
2. The unit will turn off when you press the POWER button a second time. Do not disconnect the power cord if the
operation indicator is cyan, This indicates the fan is still running (90 seconds). Disconnect the power cord when
the operation indicator becomes blue.
i
Power off?
Please press Power key again.
To Next Page
Loading...
