LG CF3DA - Page 37

Function
37
Transmission
[n] [m] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Low 1: High
(* Transmitted in hexadecimal code)
Ack
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
⇒ Adjusts the value of Black Level
12. Black Level (Command: nm)
Data 0: Low 1: High
Transmission
[n] [p] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Normal 1: Economic
(* Transmitted in hexadecimal code)
Ack
[p][ ] [Set ID] [ ] [OK] [Data] [x]
⇒ A function used to set Lamp Mode.
13.Lamp Mode (Command: np)
Data 0: Normal 1: Economic
Transmission
[j] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data 1: To set
(* Transmitted in hexadecimal code)
Ack
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
⇒ Adjusts the video position by using RGB Mode and
minimizing image shake.
14. Auto Configure (Command: ju)
Data 1: To set
Transmission
[x] [b] [ ] [Set ID] [ ] [Data] [Cr]
Data 20: Video 40: Component 60: RGB
90: HDMI1 91: HDMI2
(* Transmitted in hexadecimal code)
Ack
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
⇒ Select the input signal of a set.
15. Input Select (Command: xb)
Data 20: Video 40: Component 60: RGB
90: HDMI1 91: HDMI2
Transmission
[m] [c] [ ] [Set ID] [ ] [Data] [Cr]
Data key code * Refer to page 44.
(* Transmitted in hexadecimal code)
Ack
[c] [ ] [Set ID] [ ] [OK] [Data] [x]
⇒ Sends a key code of the IR remote control.
16. Key (Command: mc)
Data key code
Transmission
[n] [s] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Vivid 1: Standard 2: Natural
3: Cinema 4: Sport 5: Game
6: Expert 1 7: Expert 2
(* Transmitted in hexadecimal code)
Ack
[s] [ ] [Set ID] [ ] [OK] [Data] [x]
⇒ A function used to set Picture Mode
17. Picture Mode (Command: ns)
Data 0: Vivid 1: Standard 2: Natural
3: Cinema 4: Sport 5: Game
6: Expert 1 7: Expert 2
(* Transmitted in hexadecimal code)