LG DP527C - Connecting to an Amplifier; Connecting Audio Cable; Connecting COAXIAL (Digital Audio) Cable

Connecting
11
Connecting
2
Connecting to an
Amplifier
Connecting Audio cable
Connect the AUDIO OUT (L/R) on the unit to 2CH
AUDIO IN on amplier with Audio cable, such as
AUDIO Left/Right with white/red.
Connecting COAXIAL (digital
audio) cable
Connect one of the unit’s DIGITAL AUDIO OUT
(COAXIAL) jacks to the corresponding jack on your
amplier.
OPTICAL
y
If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 kHz] on the setup menu.
y
If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu.
y
If the audio format of the digital output
does not match the capabilities of your
amplier, the amplier will produce a strong,
distorted sound or no sound at all.
y
To see the audio format of the current disc
in the on-screen display, press AUDIO.
y
This unit does not perform internal (2
channel) decoding of a DTS sound track.
To enjoy DTS multi channel surround, you
must connect this unit to a DTS compatible
amplier via one of this unit’s digital audio
outputs.
,
Note
Amplier/
Receiver
Audio Cable
Rear of the Unit
Amplier/
Receiver
Coaxial Cable
Rear of the Unit
DP527-PU.ARUSLLK-ENG-1211.indd 11 2012-01-16 �� 9:54:38