Why is there no picture on my TV from my LG DR265-P1 DVD Recorder?
First, ensure that your TV is set to the correct video input mode to receive the signal from the recorder. Check that the video cable is securely connected. Also, verify that the TV is powered on.
Why won't my LG DR265-P1 DVD Recorder turn on?
If there is no power, ensure the power cord is securely plugged into the wall outlet.
What to do if my LG DVD Recorder has no power?
If your LG DVD Recorder isn't turning on, the power cord might be disconnected. Ensure that the power cord is securely plugged into the wall outlet.
What to do if my LG DR265-P1 remote control does not work properly?
If the remote control for your LG DVD Recorder isn't working correctly: * Make sure to point the remote control at the remote sensor on the recorder. * Ensure you are within 7 meters of the recorder. * Remove any obstacles between the remote and the recorder. * Try replacing the batteries in the remote control with new ones.
Why is there no picture on my LG DR265-P1?
If you're not getting a picture from your LG DVD Recorder, here are a few things to check: * Ensure the recorder is set to TV mode by pressing the TV/DVD button on the remote control. * Make sure your TV is set to the correct video input mode to receive the signal from the recorder. * Verify the video cable is securely connected. * Confirm that your TV is turned on.
What to do if my LG DVD Recorder does not start playback?
If your LG DVD Recorder isn't playing, consider the following: * Insert a disc, ensuring the disc indicator in the display window is lit. * Make sure you're using a playable disc, checking the disc type, color system, and regional code. * Place the disc with the playback side down. * Ensure the disc is correctly placed within the guide on the disc tray. * Clean the disc if it's dirty. * If the Rating level is set, cancel the Rating function or change the rating level.
Why is the picture from the external recorder distorted on my LG DVD Recorder?
If the video signal from the external component is copy-protected, connect the component directly to your TV.
What to do if my LG DR265-P1 cannot record or did not record successfully?
First, check if there is sufficient blank space on the disc; if not, use another disc. If you are trying to record a copy-protected source, it is not possible to record it. When setting the recording channel, make sure the channel is tuned on the recorder’s built-in TV tuner, not the TV's tuner. If recording to a Video mode disc, copy-once material requires a VR mode formatted disc.
Why can't I play a disc recorded on my LG DVD Recorder on another player?
If you're having trouble playing a disc recorded on your LG DVD Recorder on another player: * If the disc was recorded in Video mode, finalize the disc. * Note that some players will not play even a finalized disc recorded in Video mode. * If the disc was recorded in VR mode, the other player must be RW compatible to play it. * Discs recorded with copy-once material cannot be played on other players.
Why is timer recording not possible on my LG DVD Recorder?
If timer recording isn't working on your LG DVD Recorder: * Make sure the clock in the recorder is set to the correct time. * Verify that the timer has been programmed correctly. * If the timer record indicator light does not appear after programming, try reprogramming the Timer.
General| Brand | LG |
|---|---|
| Model | DR265-P1 |
| Category | DVD Recorder |
| Language | English |
To Next Page
