12 Installation
Installation
3
Connecting the
speakers
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on
the unit. Insert the wire and release the nger pad.
Connect the black end of each wire to the
terminals marked - (minus) and the other end
to the terminals marked + (plus).
Speaker connection
CAUTION
• Be careful to make sure children not to put their
hands or any objects into the *speaker duct.
*Speaker duct: A hole for plentiful bass sound
on speaker cabinet (enclosure).
• The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far away
from either TV screen or PC monitor.
Positioning the System
The following illustration shows an example of
positioning the system.
Note that the illustrations in these instructions
dier from the actual unit for explanation
purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (
A
).
Speaker Positioning
A
B
A
A
C
D
3
Installation
HT155DD-F0_DNGAFLK_ENG_4787.indd 12 2010-11-11 �� 11:41:48