A23
How to Install the Rack wall mounting
Kensington Security Slot- optional
Connected to a locking cable that
can be purchased separately at
most computer stores
Hold the
Screws for monitor
stationary rack and pull them
towards the arrow direction.
Screws for monitor
stationary rack
■Put the monitor on a soft cloth or cushion with its front facing downward.
■To fix a stand, push the folding stopper inwards until you hear the “click”sound
using a coin or “-“ shape screw driver, while pressing down the stand base to
the monitor.
■
Tighten the four
screws about half into the slots in the base
part, hold the two screws at the bottom to pull them inward, and
then tighten the screws all the way.
■
Make the screws in the stand base to fit into the
Rack grooves.
Then, fix it firmly by sliding it to the end of the groove.
■
Rotate the monitor screen by 180 degrees and make the
cable connection part to face downward.
Rack
33
44
55
Folding Stopper
Coin,
"-"shape screwdriver
To Next Page
Loading...
