LG M2250D - Mounting the Monitor on a Table

ENGLISH
11
ASSEMBLING AND PREPARING
Whenyouadjusttheangle,donotholdthe
buttomoftheMonitorsetframeasshownon
thefollowingillustration,asmayinjureyour
fingers.
WARNING
Mounting on a table
1
 LiftandtilttheMonitorsetintoitsupright
positiononatable.
Leavea10cm(minimum)spacefromthewall
forproperventilation.
3
 Remove2screwsandpullouttheStand Body
fromtheMonitorset.
2
 ConnecttheAC-DC AdapterandPower Cord
toawalloutlet.
Disconnectthepowercordfirst,andthenmove
orinstalltheMonitorset.Otherwiseelectric
shockmayoccur.
Tiltfrom+10to-5degreesupordowntoadjust
theangleoftheMonitorsettosuityourview.
CAUTION
NOTE
Front Rear
10 cm
10 cm
10 cm
10 cm
10- 5