Getting Started10
Getting Started
1
Setting the Clock Manually
If necessary, you can set the clock manually.
1. Press and hold Clock on the back panel for two
seconds.
-
The clock digits begin to blink.
2. Press / to select the 12/24 hour format.
-
12:00 (for a PM display) or 0:00 (for a 24 hour
display)
3. Press .
-
The hour digits begin to blink.
4. Press / to set the hour.
5. Press .
-
The minutes digits begin to blink.
6. Press / to set the minute.
7. Press .
If you want to reset the clock, repeat steps 1-7.
,
Note
ND5521-FC.BDEULLK_ENG.indd 10 12. 10. 10. �� 1:41