LG PAHCMS000 - Page 30

30
PRDCAM AHU Communication Kit Installation Manual
Due to our policy of continuous product innovation, some specications may change without notication.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
AHU COMMUNICATIONS KIT INSTALLATION
Main Module Settings
LED Display
An address for the main module is needed when PAHCMS000 is connected to an LG central controller
The address of main module can be set within ‘1~247’. In this case, the address of the main module
should be the same as the address in LG central controller.
Setting Method
- Press ‘Set’ button (red)
- Select ‘Addr’ in 7- Segment using ▲▼ buttons and then press the ‘Set’ button
- Press ‘ESC’ button to exit
Communication Module
Main Module
Name Port Function
L01L LED1 Module Comm. Tx
L02L LED2 Module Comm. Rx
L03L LED3 ODU Comm. Tx
L04L LED4 ODU Comm. Rx
L05L LED5 Modbus Comm. Tx
L06L LED6 Modbus Comm. Rx
Main Module Address Setting