LG PAHCMS000 - Control Functions

53
Installation
Due to our policy of continuous product innovation, some specications may change without notication.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
EEV KIT INSTALLATION
Control Functions
Individual Controller
Note:
1. Pipe temperature display is unavailable on the Simple remote controller.
2. Control function is unavailable when Contact Signal control is used (DIP SW1-1 is Off).
3. A wired remote controller is also required if using a wireless remote controller.
4. Partial lock is available only with Premium remote controller.
5. Refer to the product manual of the remote controller.
Function List PAHCMS000
Basic Function
Operating On / Off
O
Operation Mode Control
Cooling / Heating only
Desired Return Air Temperature Setting
X
Return Air Temperature Display
X
Desired Discharge Air Temperature Setting
60 ~ 80 °F
Discharge Air Temperature Display 51.8 ~ 103.1 °F
Fan Speed Control X
Auto Swing -
Vane Control (Louver Angle) -
Child Lock / All button Lock X
Advanced
Function
Schedule
O
Partial Lock X
Dual Set point X
Pipe Temperature display
O
1
Error Code Display
O
Defrost Status
Defrost / Normal
Compressor Status
On / Off
Filter Sign
-
Error History X
ETC
Unit of Temperature control
1.0 °F
Electric Failure compensation
O