38
206-4342
Installer Menu Items 042 through 116
Item Function Value Range Default Value Brief Description of Function
042 AUTO INPUTS 0 – 255 0
Determines the Aux inputs for which auto-sensing is enabled. See detailed
descriptions.
046 STRT AUX SRCE 1, 3, 5, 255 255 Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
047 AUX STATUS 0 / 1 0
Controls the MPI status channel response for Aux sources. Set to 1 for Aux
source to be reported as its channel number.
053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable the TV’s native Channel-Time display.
069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for MPI display characters.
070 FOR. CH-TIME 0 – 7 2 Chooses custom foreground color for MPI display characters.
071 BCK. CH-TIME 0 – 7 2 Chooses custom background color for MPI display characters.
073 CH NOT AVBLE 0 / 1 0
If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT
AVAILABLE” message is displayed if the user attempts to direct tune a channel
that is not included in the channel lineup.
075 REVERT CH 0 / 1 0
If set to 1 and loss of MPI communication occurs, the TV tunes to the
Start Channel.
077 QUICK SHUTOFF 0 – 17 0
Allows the TV to be turned OFF with press and hold of pillow speaker
channel buttons. Set to 0 to disable. Set from 1 to 17 to define hold time.
See detailed descriptions.
078 UPN MSB 0 – 255 255 User programmable number, most significant byte.
079 UPN MSB-1 0 – 255 255 User programmable number, most significant byte - 1.
080 UPN MSB-2 0 – 255 255 User programmable number, most significant byte - 2.
081 UPN LSB 0 – 255 255 User programmable number, least significant byte.
082 CHKSM ERROR 0 / 1 1 Enforces rigid MPI checksum.
083 HANDSHK TIME 0 – 5 5
Determines the MPI timing requirement of an MPI command to follow an MPI
Status Response.
084 PERMANENT BLK 0 / 1 0
Set to 1 to remove the blocking hours setting in the Function Menu for Parental
Control and make the block permanent.
088 EN NOISE MUTE 0 / 1 1 (Analog channels only) If set to 1, audio is muted if no signal is present.
090 KEY LOCK 0 / 1 0 If set to 1, all display panel button functions are locked. IR is still functional.
091 HDMI2 ENABLE 0 – 2 1
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
094 SAP MENU EN 0 / 1 1 Set to 1 to enable the SAP feature in the Function Menu.
096 DEF. ASP. RATIO 0 – 4 2 Selects the default aspect ratio. See detailed descriptions.
097 AUDIO OUTPUT 0 – 9
7
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
098 PRO:CENTRIC 0 / 2
0
Set to 0 to disable the Pro:Centric application. Set to 2 for GEM (Java) Mode.
099 BACK LIGHTING 1 – 202, 255 * 255 Sets the level of the TV picture back lighting. See detailed descriptions.
102 ATSC BAND 0 – 4 4 Selects the RF band used by the ATSC tuner. See detailed descriptions.
103 ATSC TUNE MODE 0 / 1 1 Set to 1 for Physical Channel tuning. Set to 0 for Virtual Channel tuning.
104 START MINOR CH 0 – 255 0 Selects the Minor Start Channel number. Set to 0 for analog (NTSC) channel.
106 ASP RATIO LOCK 0 / 1 0
Set to 0 to use the default aspect ratio each time the TV is turned ON. Set to 1
to retain the aspect ratio set before the TV was turned OFF.
107 BANNER SELECT 0 / 1 1 Selects the type of banner to display during channel change.
116 VIDEO MUTE EN 0 / 1 0
(Analog channels only) If set to 1, video mutes (blank screen) when no
signal is present.
* Values 201, 202 applicable for 32/43LT572M TVs only.
Installer Menu (Cont.)
To Next Page
Loading...
