LG Single "A" - Installer Setting-Setting Address of Central Control

- 35 -
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Part 2 Functions & Controls
Installer Setting - Setting Address of Central Control
Function Code Group No
Indoor No.
Press the button for 4
seconds to enter the installer
setting mode until timer segment
display "01:01".
1
Set Group No. by pressing
button.
3
Move to Indoor No. setting option
by pressing button.
4
Set Indoor No. by pressing
button.
5
Press button to save or release.
6
Press button to exit or system will
automatically exit after 25 seconds
without any input.
7
Repeat pressing button to select
Function code 02.
Ex) Setting Address as 'F5'
2