LG Single "A" - Installer Setting-Option Function Setting

- 45 -
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Part 2 Functions & Controls
Installer Setting -Optional Function Setting
For the optional product such as PLASMA PURIFICATION/dehumidifier/ electric heater and ventilation, elevation grill.
It is possible to set the items are installed or not
Function Code Existing condition
Press button for 4 seconds
to enter the installer setting
mode until timer segment
display “01:01”.
1
Select existing condition
of each mode by pressing
button.
(00: not installed,
01 : installed)
3
Press button to save or
release.
4
Press button to exit or
system will automatically exit
after 25 seconds without any
input.
5
Repeat pressing button to select
function code.
(20: PLASMA PURIFICATION,
21: DEHUMIDIFIER,
22: ELECTRIC HEATER,
23: ELEVATION GRILL,
24: VENTILATION KIT)
2