22 2A. Phone Basics
䢇
Save to save a phone number in your Contacts. (See
"Saving a Phone Number" on page 51.)
䢇
Contact Details to display the contact details. (If the
contact is saved in the Contacts.)
䢇
Main Menu to display the phone’s main menu.
䢇
3-Way Call to initiate a three-way call.
䢇
Contacts to display your Contacts list.
䢇
Voice Memo to record the current conversation.
䢇
Phone Info to check the phone number, version, etc.
Press MUTE (left softkey) during a call to mute the
microphone. Press UNMUTE (left softkey) to unmute the
microphone.
Press to route the phone’s audio through the speaker.
(You can adjust the speaker volume using the volume
keys on the side of the phone.) Press again to use the
phone's earpiece.
End-of-Call Options
After you receive a call from or make a call to a phone
number that is not in your Contacts, the phone displays
the phone number and the duration of the call. Press
OPTIONS (right softkey)> Save Contact to add the new
number to your Contacts. (See “Saving a Phone
Number” below.)
After you receive a call from or make a call to a phone
number that is already in your Contacts, the phone
displays the entry name, phone number, and the
duration of the call. To select one of the following options
after a call has ended, press OPTIONS (right softkey):
New Group/ Contact Details/ Delete/ Delete All
Saving a Phone Number
You can store up to 7 phone number entries per Contact
and 600 Contacts entries in your phone. Each entry’s
name can contain 64 characters. Your phone
automatically sorts the Contacts entries alphabetically.
(For more information, see “Contacts” on page 50.)
WARNING
Because of higher volume levels, do not
place the phone near your ear during
speakerphone use.
Note
Not all End-of-Call options are displayed for calls
identified as No ID or Restricted.
To Next Page
Loading...
Need help?
General
