76 2G. microSD™ Card
2. A pop up message will appear warning the user that
Voice calls will be disabled during the Mass
Storage.
3. Connect your phone to your computer using a
compatible USB cable. (Wait for the connection to
be completed. When connected, the host computer
will automatically detect your phone.)
To remove the connection:
䊳
When you have finished transferring data, click the
USB device icon on your computer’s taskbar, and
follow the onscreen instructions to safely unplug the
USB cable.
Important Connection Information
䢇
No driver installation is required for Windows
2000/ME/XP/Vista users. If you use Windows
98/98SE, you have to download and install the USB
Mass Storage Driver from the Sprint website at
www.sprint.com.
䢇
To avoid loss of data, DO NOT remove the USB cable,
the microSD™ card, or the battery while files are being
accessed or transferred.
䢇
DO NOT use your computer to change or edit folder or
file names on the microSD™ card, and do not attempt
to transfer large amounts of data from the computer to
the microSD™ card. Doing so may cause the
microSD™ card to fail.
䢇
DO NOT turn off or restart your computer, or put it into
standby mode, while using a mass storage device.
Doing so will result in loss or damage of data.
䢇
While you are connected to the computer, your
phone’s screen will display “Phone Off.” You cannot
make or receive calls.
䢇
If you connect a mass storage device to a peripheral
device, your device may not work properly.
To Next Page
Loading...
Need help?
General
