2B. Settings 33
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
䊳
Press and hold the volume button down in standby
mode until you see “Silence All.”
To deactivate Silence All:
䊳
Press the volume button up repeatedly to select a
volume level.
Selecting a Vibrate Type
Your phone provides a variety of vibration options. You
can assign vibration types to individual Contact entries,
types of calls, types of messages, and alarm & calendar.
1. Press >Settings > Sounds > Vibrate Type.
2. Select Incoming Calls, Messages, or Alarm &
Calendar.
3. Use your navigation key to scroll through the
available vibration types. A sample vibration will be
made as you highlight each option.
Alert Notification
Set your phone to alert you with an audible tone 10
seconds before each minute during a call, when you
change service areas, when a call is connected, and/or
when the signal fades or a call is dropped.
1. Press > Settings > Sounds > Alerts.
2. Highlight Beep Each Minute, Out of Service, Connect,
or Signal Fade/Call Drop and press .
3. Highlight On or Off and press .
Selecting a Key Tone
Your phone offers a number of options for selecting the
audible tones accompanying a keypress.
1. Press > Settings > Sounds > Keytones.
2. Highlight an option and press .
䡲
Tone Length to select a key tone length. (Longer
tone lengths may be better for tone recognition
when dialing voicemail or other automated
systems.)
䡲
Tone Volume to select a keypress volume level.
Settings
To Next Page
Loading...
Need help?
General
