57
REAR COVER ASSEMBLY
2
Remove screws that fasten the rear cover
to the side cabinets.
1
3
Remove screws that fasten the rear cover
to the base cabinet.
4
Remove screws that fasten the rear cover
to the tub outer.
5
Remove screws that fasten the drain hose
holders to the rear cover.
6
Remove screws that fasten the inlet valve
assembly and the generator assembly to
the rear cover.
7
Remove 2 earth screws from rear cover.
8
Disassemble 3 holder hooks for fixing
harness.
9
Disassemble the red connector assembled
noise filter.
10
Pull out drain hose from the rear cover.
11
Disassemble back cover.
Disassemble top plate assembly.
Needed tool : (+) Electric driver
To Next Page
Loading...
