58
REAR GASKET
Disassemble top plate assembly.
Needed tools :12,13 mm wrench, (
) Clamp Jig, Cable Tie, (+) Electric driver
Disassemble rear cover.
Remove large and small gasket clamps using
gasket clamp jig.
Unfasten the nut that fastens the rear
suspension to the base.
Unfasten the bolt that fastens the rear
suspension to the bearing housing.
Disassemble rear suspension.
Remove 8 screws from both weights.
Disassemble rear gasket.
1
2
3
4
5
6
7
8
To Next Page
Loading...
