Be sure to unplug the power to repair and replace
electric parts.
Be sure to make earth connection for trouble
diagnosis and parts replacement. If impossible,
touch earth wire on the body to remove electric
deviation between the body and product before
work.
CAUTION FOR ELECTROSATICS
1) Disassembly of Front Panel & PCB
(Main+Display) Assembly
Remove two Panel fixing screws on the back side.
Pull the control panel forward.
Remove two screws on Main PCB.
Disassemble the protect cover.
Disconnect the leads from the controller.
Disassemble the rear Frame.
Unscrew 6 screws on the PCB Display.