TRAINING MANUAL WM0742HGA
WM0742HGA Page 13 TRAINING MANUAL
INSTALLATION
REMOVE THE SHIPPING BOLTS. LEAVE THEM WITH THE CUSTOMER.
The lower right bolt is equipped with a clip that secures the cord so it is impossible to
plug in the machine without removing the bolt. The cord is further secured by an
adhesive sticker which must be broken to free the cord to plug in the machine.
INSTALL THE WASHER ON A FIRM, FLAT SURFACE.
ADJUST THE FEET TO BE LEVEL. LOCK THE ADJUSTERS IN PLACE.
To Next Page
Loading...
