TRAINING MANUAL WM0742HGA
WM0742HGA Page 54 TRAINING MANUAL
ERROR DISPLAY
If you press START/PAUSE when an error code is displayed, any error except PE will
disappear and the machine will revert to PAUSE status. In the cases of a PE, TE, or DE
error code, if the error is not cleared within 20 seconds, the machine will be turned off
automatically and the error code will blink on the display. In the case of any other error
code, if the error is not cleared within 4 minutes, the machine will be turned off
automatically and the error code will blink on the display.
In the event of an FE error code, the machine will be turned off and will not be restarted.
ERROR CODES
continued on next page
To Next Page
Loading...
