36 SPECIFICATIONS
.[[[i [[ Pr°blem i[ [ i Poss!ble Causes i [ i J So!utions ii [
Power is not turned on i " Is the power cord plugged in properly? i " Make sure that the plug is secured in a
j • Has a house fuse blown, a circuit breaker j grounded 3-prong, 120 V (60 Hz) outlet
tripped, or a power outage occurred? l • Reset the circuit breaker or replace the fuse.
Do not increase the fuse capacity If the
problem is a circuit overload, have it corrected
j , bya qua[!f]ed e[ectr!c!an ,
The door does not open j • Is the temperature in the tub too high? j • The washing machine has a safety lock built
when the cycle pauses or • Is the water level in washer high? into the door to prevent burning Leave the
finishes door closed and wait until the door lock icon
disappears from the display.
Allow the washer to complete the
programmed cycle, or run the DRAIN & SPIN
, _ j cycle to drain the water. ,
j The wash cycle time is l • Is the washing machine overloaded? Are otherl • This is normal. The washing machine
longer than usual options added to the wash cycle? automatically adjusts the cycle time for the
amount of laundry, water pressure, water
, , , temperature_ and other operat!ng condit!ons: ,
It is musty or moldy in the j • Has the incorrect detergent been used? • Use only HE (High-Efficiency) detergent
tub • Did you clean the tub periodically? recommended for a front-loading washing
j. machine.See page 29, clean the insideand outside of
• i the washing machine periodically •
SPECIFICATIONS
Mode) WM3050C*
' i
Description j Front-Loading Washer
' t
Electrical requirements j 120 VAC @ 60 Hz
' I
Max water pressure j 145- 116 PSi (100- 800 kPa)
' i
Dimensions j686 cm (W) X 786 cm (D) X 983 cm (H), 1295 cm (D with door open)
j27' (W) X 29s/4 '' (D) X 38/1/16" (H), 51" (D with door open)
Net weight j 189 161b (85.8kg)
,Max spin speed i1200 RPM
To Next Page
Loading...
