LI-COR LI-6400 - Returns the Pen Location; Returns the Width of the Graphics Window in Pixels; Gets the Current Graphics Window; Define a Graphics Window

LPL Reference
The Reference
24-48 Using the LI-6400
24
GWHERE Returns the pen location
Initial: -
Final: Double
userHoriz, Double userVert
Related Keywords: GSCALE.
GWIDTH
Returns the width of the graphics window in pixels
Initial: -
Final: Long
pixelsWide
Related Keywords: GHEIGHT, GWINDOW.
GWIGET
Gets the current graphics window
Initial: -
Final: Long
left, Long top, Long right, Long bottom
-or-
Initial: Rect theWindow
Final: Rect theWindow
Units are Pixel Hardware Coordinates.
Related Keywords:
GWINDOW
GWINDOW Define a graphics window
Initial: Rect newWindow
Final: -
Units are pixel hardware coordinates. User scaling is not affected by this command -
the user scaling will be in effect in the new window.
Related Keywords:
GWIGET.
HALT
Terminate an IDLE or TIDLE
Initial: -
Final: -
Related Keywords: IDLE, TIDLE
HASCOPRO Is there a coprocessor installed?
Initial: -
Final: Long
Logic (1=yes, 0=no)
HIDESOFT Hide the function key labels, if any
Initial: -
Final: -
Related Keywords:SHOWSOFT
HSCOUNTS High speed counter
Initial: -
Final: Long
counts
Returns the number of counts from the high speed counter since the previous call to
HSCOUNTS. See Pulse Counting on page 26-27.