Operation of Remote Controller
Auto cleaning Planned cleaning
Power button
Forward
waterflow control
Leftward
Start/pause
Edge cleaning
Spot cleaning
Home
Schedule
Backward
Rightward
Suction adjustment
1. Power button: press the key to make the machine enter the sleeping mode.
2. Home key: press the key to make the machine automatically return to the charging base for charging.
3. Edge cleaning key: press the key to enable the robot to perform cleaning around the surrounding of a fixed object.
(e.g. a wall)
4. Spot cleaning key: press the key, and the robot will perform fixed-point cleaning in a "spiral" route.
5. Schedule key: press the reservation key for three seconds to enter the reservation mode.
6. Forward key: press the key to drive the machine forward in selection mode.
7. Backward key: press the key to drive the machine backward in selection mode.
8. Leftward key: press the key to drive the machine leftward in selection mode.
9. Rightward key: press the key to drive the machine rightward in selection mode.
10. Start/pause key: when the robot is in standby, press this key to activate cleaning; when the robot is operating, press
this key to suspend cleaning; when the robot is hibernating, press this key to awaken the robot.
11. Waterflow control key: three levels of water volume can be optional by pressing the water volume adjustment key.
12. Suction adjustment key: three levels of cleaning suction can be optional by pressing the level adjustment key.
13. Auto cleaning key: press the key to make the machine enter random cleanig mode.
14. Planned cleaning key: press the key to make the machine enter smart planned cleaning mode.
13
To Next Page
Loading...
