Liectroux T6S - Routine Maintenance

Directly tear down the duster cloth from the duster
cloth bracket, and clean it using daily detergents.
Tips:
1. It is recommended to replace the duster cloth every 3-6 months,
in order to ensure sound cleaning performance.
2. If the duster cloth is not on the bracket, please do not mount the
bracket onto the sweeper robot for cleaning, in order to avoid
damaging the magic tape.
Clean the Duster Cloth
1. Gently lift the finger position of the dust box cover.
2. The dust box cover will open. Hold the handle with
hand and gently force it apart upwards.
3. Open the box cover.
4. Take out the filter screen.
5. Turn the dust box and pour out the garbage.
Dust Box Cleaning
1.The primary & HEPA filters may be cleaned
with the electric blower or brush.
2.After cleaning the dust on the primary & HEPA
filters, install the primary & HEPA filters into the
dust box again.
3.Put the dust box back into the equipment.
Clean the Primary & HEPA Filters
Wipe the electrode slices of the charging base with the
soft dry cloth.
Charging Base
Routine Maintenance
Primary HEPA filter
Charge Connecting Points
Dust box
Tips:
Remove HEPA and relevant assemblies in the dust box, and use clear
water to rinse the dust box.
Tips:
It suggests being cleaned every month.
Tips:
If the dust box is not installed or it is not installed in place, the
garbage cannot enter the dust box.
15