Routine Maintenance
The robot is internally installed with the high-performance
lithium-ion charging battery pack. In order to maintain the
battery performance, please maintain the robot in the
charging state in daily use.
Battery Maintenance
1. Directly turn the machine up and pluck up the side
brushes vigorously.
2. Remove and clean the side brushes.
3. Mount the side brushes back to the equipment after
cleaning.
4. If the brush is deformed, please use hot water to
restore it.
Routine Maintenance
1. Remove the nose wheels, clear any
intertwined hairs around the nose wheel.
2. Put the nose wheel back to their original
positions, and press them downwards in force
to make them in place.
Cleaning of the nose wheel
Use a soft cleaning cloth to wipe the sensor to
ensure sensitivity.
Cliff Sensor
Cliff sensor
Nose Wheel
Tips:
The side brushes suggest being replaced every 3-6 months, to ensure the
sweeping effect.
Tips:
1. If you do not use it for a long time, please shut it down and store it. Please
charge it every three months at least, to prevent the battery from over
discharge damage.
2. If any leakage of the battery occurs, please remove the battery and wipe
the battery jar clean.
3. When the battery is in deep discharge or stays unused for a prolonged
period, its capacity may be diminished, and it may need activation.
Activation approach:
Put the robot on the charging base manually, charge it for 3 minutes and
remove it from the charging base, repeat this process three times, and then
charge the robot for 3-5 hours as usual.
Tips:
It suggests being cleaned every month.
16
To Next Page
Loading...
