620
91
620
92
A/C Temperature Adjustment Button
Selector Button for Automatic Mode
Press the button: the indicator illuminates,
that the automatic operation
is selected and the A/C is under automatic
state.
indicating
Unde r automatic operation, th e A/C equipment
will select the most appropriate fan rotation
speed and air flow according to temperature.
If you want to select by yourself, choose
manual control.
To shut down automatic operation, press
“OFF”button. Speed adjustment button
of blower or selector button for inner and
outer circle mode.
A/C Air Volume Adjustment Button
Pres s (increase) or (decrease)
butt on to adjust the rotation speed of blo wer.
“ ” “ ”
As per Air Vent
1. Up Ventilation: the air flow is mainly
from the central vent at dashboard and
the side vent.
2. Up and Down Ventilation: the air flow is
mainly from the central vent at dashboard,
the side and down vents.
3. Down Ventilation: the air flow is mainly
from the down vent.
4. Def rost, Demi st and Down Ven tilat ion:
the ai r flow is mai nly from the do wn vent and the
ven t of wi nd shi el d.
Appl y whe n the selector
button for inn er an d outer circle mode is at outer
circle position .
1 2
3
4
Under automatic operation, unless other
rotation speed is required, he
rotation speed of blower doesn't need
adjusting.
or else t
For temperature increase, press“ ”button,
for temperature decrease, press“ ”button.
When it is t ur ned to the coldest, “MAX.COLD”is
displayed, when it is turned to the hottest,
“MAX.HO T”is displayed.
Press the button to turn on/off automatic
A/C system.
“AUTO/OFF”Button
Selector Button for Inner and Ou ter
Circle Mo de
5. Defrost, Demist: the air flow is mainly
from the vent of windshield. Apply when
the selector button for inner and outer
circle mode is at outer circle position.
Front Defroster Switch
Press the switch, the indicator illuminates,
the air flow is mainly from the vent of
windshield. Press it again, the indicator
is out, the previous air flow setting is
recovered.
Press the front defroster switch. When some
mist is formed, the A/ C wi ll turn on automa tically,
the “A/ C”indicator illumi nates, and cold
wind is blown, clearing the wi ndshield
imme diately. Wh en some frost is forme d, the
A/ C wi ll eating automa tically, and
warm wind is blown for defrosting, clearing
the wi ndshield imme diately.
start h
For setting the sel ector button for blow mode,
refer to the “settin g of selector button for blow
mode”in the following text.
Press the button to select air source.
“A/C”Switch
To start up the A/C system, press the “A/C”
switch, which illuminates. To shut down
the A/C system, press the switch again.
Note: when the blower is not turned on and
no air is blown, the A/C system can't start
up by pressing the “A/C”switch.
Press the button to recycle the air in the
car. Press it again to take in the air outside
of the car.
Instru cti on Manual of Lifa n Sedan
LIFAN
Instru cti on Manual of Lifa n Sedan
Instru cti on Manual of Lifa n Sedan
LIFAN
Chongqing Lifan Passenger Vehicle Co. , Ltd.
Chongqing Lifan Passenger Vehicle Co. , Ltd.
To Next Page
Loading...
