EasyManua.ls Logo

Lifeloc FC10Plus User Manual

Lifeloc FC10Plus
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Lifeloc FC10
Plus
Operations Manual
Unlock the Power
of Alcohol Testing

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Lifeloc FC10Plus and is the answer not in the manual?

Lifeloc FC10Plus Specifications

General IconGeneral
Sensor TypeFuel Cell
Measurement Range0.000 to 0.400% BAC
Resolution0.001% BAC
Analysis Time5 seconds
DisplayLCD
Warranty1 year
TypeBreath Alcohol Tester
Accuracy+/- 0.005 %BAC at 0.100 %BAC
Operating Temperature0-55°C (32-130°F)
Power SupplyRechargeable battery
Calibration Interval12 months
Response TimeLess than 10 seconds

Summary

Lifeloc FC10Plus Introduction and Features

FC10Plus Front View Overview

Identifies and describes the physical components of the FC10Plus device.

Key Features of the FC10Plus

Details the main functionalities and advantages of the FC10Plus breathalyzer.

Preparing the Lifeloc FC10Plus for Use

Installing Batteries and Powering On

Guide to inserting batteries and turning the device on and off.

Subject Observation and Mouthpiece Attachment

Ensuring accurate testing via subject observation and mouthpiece setup.

Lifeloc FC10Plus Breath Testing Modes

Explanation of Breath Testing Modes

Overview of Automatic, Manual, and Passive testing methods.

Conducting Breath Alcohol Tests

Step-by-step guides for Automatic, Manual, and Passive tests.

Lifeloc FC10Plus Operation Details

Understanding Breath Flow and Alcohol Curve Displays

Interpreting breath flow graphs and alcohol curve visualizations.

Test Results and Viewing Previous Tests

How to read results and access stored test history.

Safe Mouthpiece Removal

Instructions on how to properly and safely remove the mouthpiece.

Lifeloc FC10Plus User Settings Configuration

Configuring Time, Date, and Trigger Mode

Adjusting device time, date, and breath sample trigger.

Security and Display Settings Management

Setting passwords and adjusting LCD contrast and test order.

Setting Results Format and Pass/Fail Levels

Choosing result display and configuring pass/warn/fail thresholds.

Lifeloc FC10Plus Calibration Settings

Selecting Calibration Standard and Type

Choosing calibration method (Wet Bath/Dry Gas) and standard.

Configuring Calibration Lock-out Features

Setting intervals for calibration and calibration check reminders.

Lifeloc FC10Plus Wet Bath Calibration Procedures

Wet Bath Simulator Setup and Calibration

Guide to setting up the simulator and performing wet bath calibration.

Performing a Wet Calibration Check

Steps to verify calibration accuracy using a wet bath simulator.

Lifeloc FC10Plus Dry Gas Calibration Procedures

Dry Gas Tank Setup and Calibration

Guide to setting up the dry gas tank and performing dry gas calibration.

Dry Gas Calibration Check and Device Status

Verifying calibration with dry gas and checking device status.

Lifeloc FC10Plus Maintenance

Fuel Cell Care, Cleaning, and Battery Management

Information on maintaining fuel cells, cleaning the device, and battery management.

Lifeloc FC10Plus On-screen Messages

Interpreting On-screen Messages

Explanation of various messages displayed by the FC10Plus.

Lifeloc FC10Plus Service and Support

Warranty and Extended Service Plans

Details of the factory warranty and available extended service plans.

Lifeloc FC10Plus Supplies and Information

Important Notices and Instrument Disposal

Key usage advisories and guidelines for device disposal.

FC10Plus Technical Specifications

Key technical data including size, weight, range, and battery life.

Accessories, Supplies, and Menu Charts

Catalog of available accessories, supplies, and reference charts.

Related product manuals